MENU
Product Center > PTFE Rods
rBwBEmQqckqAa10BAAJ0TjZ2Mzg258.jpg
  • rBwBEmQqckqAa10BAAJ0TjZ2Mzg258.jpg

PTFE Rods

Molded rod: Made by molding processing, it is divided into pure rod and filling rod (colored rod, copper powder rod, fiberglass rod, graphite rod, carbon fiber rod, carbon powder rod, polystyrene rod, etc.).
Whatsapp: +86 153 9713 9528

  Product classification:

Molded rod: Made by molding processing, it is divided into pure rod and filling rod (colored rod, copper powder rod, fiberglass rod, graphite rod, carbon fiber rod, carbon powder rod, polystyrene rod, etc.).

Extrusion rod: Made from dispersed polymerized polytetrafluoroethylene resin through paste extrusion processing.

Pushing rod: Made of suspended polytetrafluoroethylene resin and processed by plunger pushing, it is divided into pure rod, graphite rod, and fiberglass rod.

Product features:

1. Low and high temperature resistance (-180C -+260C)

2. Corrosion and climate resistance

3. High lubrication and non adhesion

4. Non toxic

5. Incombustibility

6. Acid and alkali resistance (excluding molten alkali metals)

7. Antioxidant properties

Product specifications:

Classification sizeDiameter (mm)Length (mm)
Molded rod6~500100~1000
Extrusion rod1~41000-5000
Push rod5~1501000或2000
Note: The length can be reprocessed according to customer requirements, please discuss the details separately.

Main technical indicators:

entry nameunitPure PTFE index
Apparent density    g/cm32.10~2.30
tensile strength
MPa≥15
elongation at break
%≥150
Note: When the diameter of the rod is greater than 16mm, only the apparent density is tested.


上一个: PTFE Rods
下一个: PTFE Rods